Debbie Shore’s DIY Sewing Storage Project
Create this handy sewing storage solution with a little help from the fabulous Debbie Shore, and keep your sewing table tidy, no matter what you’re working on! This crafty little sewing storage easel is a must-have for sewing enthusiasts everywhere. Not only is it a fantastic sewing project to get stuck into, but you’ll absolutely love using it once its finished to! Stand it on your sewing table when you start working on your next sewing project, and fold it away when you’ve finished. What’s not to love?
You Will Need:
- 4 x fat quarters fabric
- 2 pieces of cardboard measuring 11.5” x 8.5” [I used the card that came in the packaging of a bed sheet]
- Erasable ink pen
- 14” elastic
- 4 x buttons
- 2 x elastic bungees
Sewing Storage Project Instructions:
For the pockets, cut one piece of fabric measuring 13” x 12”, one measuring 13.” x 10” and one piece measuring 13.” x 8”. Fold each in half lengthways, right sides together and sew to form three tubes. Turn the right sides out and press, then edge stitch across the tops.
Draw a ling along the centre of one of the large pieces of fabric. Place the pocket over one half, with the bottom of the pocket 2” from the edge of the fabric. Sew across the bottom of the pocket, along each side, then one dividing line straight down the centre.
Place the remaining pocket over the opposite side of the cover, 2” from the edge of the fabric. Sew across the bottom. Pin the elastic 2.5” above the pocket. Draw, then sew dividing lines across the elastic, then in the same place over the pocket, to create smaller pockets in any size you like. I made five slim pockets for pencils, and two larger pockets to the side.
Place the two cover pieces right sides together, and sew all the way round, leaving the end opposite the buttons open. Snip across the corners and turn the right side out. Push one piece of cardboard inside the cover. Sew across the centre line.
Turn the raw edge of the cover under by 0.5” and press. Take one of the remaining base pieces and sew two buttons 1” from the bottom and 3” from each side.
Sew the bungees, facing inwards, 3.5” from each side, just under the buttons.
Place the two base pieces right sides together, and sew, leaving the top open. Snip across the corners, turn the right side out and press. Insert the open end of the base inside the open end of the cover, with the buttons both on the same side and sew.
Fill your fabulous sewing storage solution with pens, rulers and tools!
When not in use, carefully fold the sewing storage easel over and wrap the base around the cover, fastening the bungees over the buttons.
The easel is meant to store slim items, bulkier items can be stored whilst the easel is open but may prevent it from closing when not in use.
Want to see more of our fantastic sewing projects and articles? You can view them all right here!