DIY Hanging Wall Organizer by Debbie Shore
Looking for a way to store those loose bits and bobs? Debbie Shore’s Hanging Wall Organizer is a handy storage unit that takes up what is usually wasted space… the back of the door! Useful for the bathroom, kitchen, kids’ bedroom or craft room, it’s a practical solution to your storage needs. Download the pattern and follow Debbie’s step-by-step instructions below to craft your own hanging organizer… you can adapt the size easily and add as many pockets as you need!
You Will Need:
- 18” x 15” fabric for the front
- 18” x 15” single-sided fusible foam stabilizer
- 18” x 15” backing fabric
- 23” x 15” pocket fabric
- 25” ribbon
- 2 x snap hooks
- 18” doweling
- 24” cord to hang
- Wet fabric glue
- Printable Template [DOWNLOAD HERE]
Debbie Shore’s DIY Wall Organizer Tutorial:
To make your hanging wall organizer, first fuse the foam stabilizer to the wrong side of the front fabric.
Cut two pieces of pocket fabric measuring 16” x 5”, and two measuring 16” x 4”. Then cut four pocket pieces from your downloadable pattern.
Sew the long pocket pieces right sides together along the top and bottom to form two tubes. Next, turn the right side out and press, then edge stitch across the tops.
Sew the remaining pocket pieces right sides together, leaving a turning gap in the bottom of about 2”. Next, turn the right side out and press, then edge stitch across the tops.
Cut two lengths of ribbon measuring 4”, then fold through the swivel snaps and glue in place.
Place the long small pocket over the back of the hanger, 1 ½” from the top; the two shaped pockets evenly 2” from the bottom, then the larger pocket in the center. You may find clips easier than pinning as the foam is quite thick. Sew across the bottom of each pocket. Place the swivel snaps over the bases of the two bottom pockets, and sew.
Bring the sides of the bottom pockets towards the center to give them shape, then pin the tops.
Sew along the sides – make sure you reverse stitch at the tops to make the seams strong. Now sew dividing lines along the long pockets, wherever you like! Smaller pockets for pens, larger ones for letters… I’ve sewn mine 4” from each side, leaving a larger pocket in the center.
Cut three strips of ribbon, each measuring 4”, then fold in half and sew evenly spaced to the top of the hanger, facing inwards.
Sew the backing fabric right sides together to the front of the hanger, leave a turning gap in the base of about 4”. Snip across the corners, turn the right side out and press. Now edge stitch all around to complete your hanging wall organizer.
Love this sewing project? Check out the rest of our sewing projects for the home and more, right here!